Wearable and Recyclable Water-Toleration Sensor Derived from Lipoic Acid.

Flexible wearable sensors recently have made significant progress in human motion detection and health monitoring. However, most sensors still face challenges in terms of single detection targets, single application environments, and non-recyclability. Lipoic acid (LA) shows a great application prospect in soft materials due to its unique properties. Herein, ionic conducting elastomers (ICEs) based on polymerizable deep eutectic solvents consisting of LA and choline chloride are prepared. In addition to the good mechanical strength, high transparency, ionic conductivity, and self-healing efficiency, the ICEs exhibit swelling-strengthening behavior and enhanced adhesion strength in underwater environments due to the moisture-induced association of poly(LA) hydrophobic chains, thus making it possible for underwater sensing applications, such as underwater communication. As a strain sensor, it exhibits highly sensitive strain response with repeatability and durability, enabling the monitoring of both large and fine human motions, including joint movements, facial expressions, and pulse waves. Furthermore, due to the enhancement of ion mobility at higher temperatures, it also possesses excellent temperature-sensing performance. Notably, the ICEs can be fully recycled and reused as a new strain/temperature sensor through heating. This study provides a novel strategy for enhancing the mechanical strength of poly(LA) and the fabrication of multifunctional sensors.

Wood-Inspired Ultrafast High-Performance Adsorbents for CO2 Capture.

Under favorable regeneration conditions (120 °C, 100% CO2), ultrafast adsorption kinetics and excellent long-term cycle stability are still the biggest obstacles for amine-based solid CO2 adsorbents. Inspired by natural wood, a biochar with a highly ordered pore structure and excellent thermal conductivity was prepared and used as a carrier of organic amines to prepare ideal CO2 adsorbents. The results showed that the prepared adsorbent has a very high adsorption working capacity (4.23 mmol CO2·g-1), and its performance remains stable even after 30 adsorption-desorption cycles in the harsh desorption environment (120 °C, 100% CO2). Due to the existence of the hierarchical structure, the adsorbent exhibited ultra-fast adsorption kinetics, and the reaction rate constant is 37 times higher than that of traditional silica. This adsorbent also showed a very low regeneration heat of 1.64 MJ·kg-1 (CO2), which is especially important for the practical application. Therefore, these biochar-based adsorbents derived from natural wood make the CO2 capture process promising.

Size-transformable nanohybrids with pH/redox/enzymatic sensitivity for anticancer therapy.

A lack of sufficient tumor penetration and low delivery efficiency are the main reasons for the limited clinical applications of nanocarriers in cancer treatment. Tumor microenvironment responsive drug delivery systems have been attracting great interest in cancer therapy as the desired drug release can be achieved in the disease sites for optimal treatment efficiency. In this work, we developed a biodegradable nanohybrid drug delivery system with pH/redox/enzymatic sensitivity by the simple assembly of bovine serum albumin nano-units (about 5 nm) onto graphene oxide nanosheets in the presence of a naturally originating protein (gelatin). The nanoparticles can maintain a constant size under physiological conditions, while releasing 5 nm nano-units containing the drug upon triggering by the environment-mimicking protease highly expressed in the tumor microenvironment. Furthermore, after reaching the tumor tissue, the acidic, reductive, and enzymatic microenvironments turned on the switch for DOX release, and the combination of chemotherapy and photothermal therapy was achieved under the trigger of near-infrared light. The nanosystems have the potential to improve the penetration ability through the depth of the tumor tissue to enhance drug intracellular delivery and antitumor bioactivity.

Drug-mediation formation of nanohybrids for sequential therapeutic delivery in cancer cells.

In order to overcome the multidrug resistance (MDR) of tumor cells, it is very important to develop nanocarriers which can effectively load drugs while releasing them in a sequential way. Herein, nanohybrids with such properties have been fabricated by a first loading of one anticancer drug onto a silicate nanodisk (Laponite (LP), 25 nm in diameter and 0.92 nm in thickness) and a subsequent assembly with a pH sensitive poly(N-vinylpyrrolidone) (PVP) as a protective layer, followed by a loading of with another anticancer drug. The resulting nanohybrids (LDPM) present a high drug encapsulation efficiency and long-term colloidal stability. However, if the two drugs are loaded onto LP before PVP decoration, the formed particles tend to form microsized aggregates with poor colloidal stability. In vitro release study indicates that LDPM can deliver the anticancer drugs in a sequential way, which can be further accelerated under acidic microenvironments mimicking both solid tumor and endo-lysosomal compartments, exerting synergistic anticancer cytotoxicity. The drug-mediated formation of nanocarriers may enlighten a design of novel nanoplatform for co-delivery of therapeutic agents, beyond anticancer drugs, in a combinative way for drug delivery applications.

Salt-Induced Regenerative Surface for Bacteria Killing and Release.

Antibacterial surfaces with both bacteria killing and release functions show great promise in biological and biomedical applications, in particular for reusable medical devices. However, these surfaces either require a sophisticated technique to create delicate structures or need rigorous stimuli to trigger the functions, greatly limiting their practical application. In this study, we made a step forward by developing a simple system based on a salt-responsive polyzwitterionic brush. Specifically, the salt-responsive brush of poly(3-(dimethyl (4-vinylbenzyl) ammonium) propyl sulfonate) (polyDVBAPS) was endowed with bactericidal function by grafting an effective bactericide, i.e., triclosan (TCS). This simple functionalization successfully integrated the bacteria attach/release function of polyDVBAPS and bactericidal function of TCS. As a result, the surface could kill more than 95% attached bacteria and, subsequently, could rapidly detach ∼97% bacteria after gently shaking in 1.0 M NaCl for 10 min. More importantly, such high killing efficiency and release rate could be well retained (unchanged effectiveness of both killing and release after four severe killing/release cycles), indicating the highly efficient regeneration and long-term reusability of this system. This study not only contributes zwitterionic polymers by conferring new functions but also provides a new, highly efficient and reliable surface for "killing-release" antibacterial strategy.

Strong and fast-recovery organic/inorganic hybrid AuNPs-supramolecular gels based on loofah-like 3D networks.

Super strong and fast-recovery organic/inorganic hybrid gold nanoparticle (AuNPs)-supramolecular gels based on a three-dimensional loofah-like nanoscale network self-assembled by polyhedral oligomeric silsesquioxane (POSS) core supramolecular gelators are reported for the first time. Two series of POSS core organic/inorganic hybrid gelators, POSS-BOC-l-Homophenylalanine (POSS-Hpy) and POSS-Boc-Cys(Bzl)-OH (POSS-Cys), with two types of peripherals having different abilities for driving the self-assembly of AuNPs in gels were designed and synthesized, both of which self-assembled into three-dimensional loofah-like nanoscale gel networks producing hybrid physical gels with fast-recovery behaviors. The mechanical properties of the resultant hybrid gels were dramatically increased by as much as 100 times in the system of sulfur containing POSS-Cys gelators without destroying the fast-recovery behaviors, with the addition of AuNPs, which had direct interaction with AuNPs to give S-Au non-covalent driving force to lead AuNPs self-assemble onto the 3D loofah-like network nanofibres in the supramolecular hybrid gel system. However, in the POSS-Hpy gelator system without sulfur, no strong interaction with AuNPs existed and the POSS-Hpy nanocomposites showed no clear changes in morphology, thermal stability or rheological properties, confirmed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), tube-inversion and rotational rheometer measurements. This indicated that the organic/inorganic hybrid gelator POSS-Cys could be applied to the formation of soft materials in which AuNPs were self-assembled and closely arranged into three-dimensional nanoscale networks. This hybrid material has great potential for applications in self-recovery, nano- and micron-scale electronic devices, because it has both a large mechanical strength and a fast-recovery capability.